1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow Removal

Discussion in 'Western Plows Discussion' started by repo_man62, Nov 2, 2005.

  1. repo_man62

    repo_man62 Senior Member
    Messages: 502

    Well...I have my first cable operated plow. Need to take it off one truck to put on another. How do you remove the cables to run them back into the engine compartment?

    100_8102 (Small).jpg

    100_8104 (Small).jpg

    100_8103 (Small).jpg

    100_8106 (Small).jpg
     
  2. ROFOTH

    ROFOTH Junior Member
    Messages: 5

    you need to pop the covers off the pump where the cables go in. Then loosen the set screws on the cables.When you have the covers off you can see how the cables are connected. Just undo the cables , then disconnect the wire from your t-handle or joystick at your power source, then dismount your controler from where you have it mounted, and pull the whole assembly out in one piece. Just rehook everything in reverse order when you put it in your other truck.
     
  3. repo_man62

    repo_man62 Senior Member
    Messages: 502

    Thanks alot! I really appreciate the info...Bob