1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow problem

Discussion in 'Meyer / Diamond Products Discussion' started by ksplower, Oct 12, 2010.

  1. ksplower

    ksplower Junior Member
    from ks
    Messages: 6

    I am new to the Meyers snow blades. I was getting it ready for the season and it lifts the blade ok and goes side to side. But when it is turned to one side I can easily push on the front of the blade and it will move. It acts like the there is no pressure. I checked the fluid level and seems to be full.Any ideas?
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If you didn't introduce any air into the system then it's likely a cross over valve issue. Debris caught in the valve or the spring is broken or rusted to pieces.