1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow change.

Discussion in 'Boss Plows Discussion' started by beb, Oct 18, 2012.

  1. beb

    beb Junior Member
    Messages: 20

    I have a 03 Dodge ram 2500HD with a Boss 9'2" poly V-Blade. RT3 Mount. It is a 13 pin connection. My question is can I switch to a Boss straight blade? I realize I would have to change the handheld controller. Would any of the truck wiring need changing? Thanks
     
  2. kurtandshan

    kurtandshan Senior Member
    Messages: 323

    Nope, no need to change any wiring. Also, I believe you can actually operate the straight blade with the v-controller. Might have that wrong though.
     
  3. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    I run a straight blade on a vee joystick controller. So it can be done, just not sure about the handheld.
     
  4. nrplowguy

    nrplowguy Senior Member
    Messages: 130

    You can run a v on a straight blade handheld but it will run like a straight and its the same for straights on v blade handhelds