1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow adjustments 29 series

Discussion in 'Sno-Way Discussion' started by bagozzi, Jan 16, 2009.

  1. bagozzi

    bagozzi Junior Member
    Messages: 8

    When my plow is down and turn all the way left or right, it does not sit flat on the ground one side is. the other is up about 1in off the ground is there a adjustment for that
     
  2. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

    Is the center bolt connecting the a-frame and swing frame tight?
     
  3. bagozzi

    bagozzi Junior Member
    Messages: 8

    Yes i believe it is i will have to look at it
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    What height are the mounting cups on the truck mount? if they are above 10 1/2 inches that could be your problem. The angle geometry doesn't work correctly it tries to angle into the ground.
     
  5. Mad Max 4x4

    Mad Max 4x4 Member
    Messages: 36

    How do you fix that?
     
  6. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992


    What truck?

    Opinions include lowering the mount or lowering the truck (often caused by new tires after the mount was installed)
     
  7. bagozzi

    bagozzi Junior Member
    Messages: 8

    Thanks,
    Tom and Basher I have put new tires on the truck and went taller that is my problem now, i guess i have to get the v blade since that mount can sit higher.