1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

please help, harness installation on a 98 tacoma

Discussion in 'Fisher Engineering Discussion' started by gixxer1, Oct 16, 2008.

  1. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    i have the frame and harness all hooked up but plow does not move at all.
    does anyone have the harness installation instructions? its a insta-act minute mount.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Older relay harness? Or newer style with the under hood Isolation module?

    If it's Iso is it the three or four port Iso?

    Two or three plug plow to truck connectors?
     
  3. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    3 plugs(main pump pwr,lights,angle control), iso box under hood.
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    3 or 4 port Iso?
     
  5. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    allmost pos. its a 4 port. i'll have to double check tomorrow.
     
  6. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Here's the complete manual that should give you any info you need. Basic wiring diagram is on page 12 and goes into greater details from there.

    Fisher manual
     
  7. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    thank you, its a big help...........have a great day!
     
  8. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    Did you hook up the selenoid?
     
  9. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    its hooked up but pwr is not traveling thru. may be a bad solinoid.
     
  10. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    Are you sure it is hooked up properly??????
     
  11. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    yes its hooked up correctly but the solinoid might be bad.
     
  12. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    Thankfully, it is only a $20 part, and redily available. I have one on hand if you get in a bind.
     
  13. gixxer1

    gixxer1 Junior Member
    from mass
    Messages: 11

    where you located? i live in stoughton