1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

pic of fisher iso module needed

Discussion in 'Ram Trucks' started by 06qcsbny, Aug 3, 2016.

  1. 06qcsbny

    06qcsbny Junior Member
    Messages: 5

    hello everyone havent been on here in a while.i just bought a new 3500cclb 6.4l and iam planing on installing my plow on it but i have not seen where they are mounting the iso module on the newer trucks.if some one has a pic of where theirs is mounted that would be great thanks
     
  2. Randall Ave

    Randall Ave PlowSite.com Addict
    Messages: 1,950

    Just go on the western site and look at the installation instructions. If it has to be somewhere specific, they will tell ya. Otherwise over by the master cylinder area is s good start.
     
  3. 06qcsbny

    06qcsbny Junior Member
    Messages: 5

    i just had the fisher dealer by me do the install due to lack of time and garage to do it.thank you tho