1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

PCM B fuse and ABS light / stalling problem - Sierra 2500

Discussion in 'Chevy Trucks' started by G.L. In Ont, May 31, 2006.

  1. G.L. In Ont

    G.L. In Ont Member
    Messages: 63

    Hey guys - have a Sierra 2500 '03 GAS, V8 6.0L

    When fuel indicator is near Empty, truck will stall - "service brake system" will show on display, and turning key will give nothing. The PRNDL light is also off so you cannot see what gear you're in. PCM B (20 amp) fuse will be blown.

    Once I fill it up and change the fuse we're good to go.

    Anyone seen anything like this before?

    Cheers, GL
     
  2. Yaz

    Yaz PlowSite.com Addict
    from NH
    Messages: 1,061

    Hmm what runs off that fuse? I think you need a wiring diagram and start there. Since it related to low fuel I'm wondering if it a fuel pump ground or pump or sending unit. That is strange to blow the fuse...
     
  3. G.L. In Ont

    G.L. In Ont Member
    Messages: 63

    Thanks

    Thanks Yaz. The dealer mechanic has said it could be the fuel pump. Apparently the wiring from that fuse goes to the fuel pump and the main computer.