1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Parts Older Plows

Discussion in 'Used Plowing and Truck Equipment Forum' started by rolandpell, Nov 8, 2004.

  1. rolandpell

    rolandpell Junior Member
    Messages: 23

    Hey There All .its That Time Again To Get Ready .i Just Want To Let Everyone Know That I Have Many Used Plow Parts All Kinds From Homemade To Fisher 9fts . No Minute Mounts Yet .if You Need Parts Let Me Know .i'll Ship Any Where .
     
  2. willy8888

    willy8888 Junior Member
    Messages: 8

    ford f150 parts

    Do have any mounting parts for 1986 f150?
     
  3. smiti105

    smiti105 Member
    Messages: 90

  4. hilltopfarm

    hilltopfarm Junior Member
    Messages: 9

    plow

    I was wondering if you had any plows that were 7 or 8 ft that would fit a 1996 f250 thanks email. stihl088@aol.com i am located in foster RI thanks
     
  5. willy8888

    willy8888 Junior Member
    Messages: 8

    mounting brackets

    Anytype of plow mounting brackets for 1986 ford f150. Looking for undercarriage mounting parts only. Thanx.
     
  6. powerjoke

    powerjoke PlowSite.com Addict
    Messages: 1,341

  7. Plowking

    Plowking Junior Member
    Messages: 23

    02 F-350 meyer undercarriage

    Looking for a meyer unimount undercarriage for my 02 F-350 used.
     
  8. one ton dually

    one ton dually Member
    Messages: 61

    Meyer wiring

    Looking for E-60 wiring,and switch's. Or slick stick type control for the E-60.
     
  9. Mounting Carton

    Looking for Meyer part #17089
    or if you dont have the part number....it fits 88-100 GM 1500 series Tahoes
     
  10. daninline

    daninline Senior Member
    Messages: 430

    A buddy of mine is looking for the Plow frame to bolt onto a 1994 F150 for a Western plow setup older, the plow mounts look to be about 25"
    You can email me at dan@kcomputers.net

    Thanks
    Dan
     
  11. ggwash21

    ggwash21 Senior Member
    Messages: 132

  12. Ole JIM

    Ole JIM Senior Member
    Messages: 137

    Hi Roland

    I need 4 Springs for an 8ft Fisher!--Do You have E*M? & How Much?--Ole JIM--BADCAR@WEBTV.NET--- THANKS!
     
  13. deathwish

    deathwish Junior Member
    Messages: 6

    89f350 2 wheel

    hi im looking for push plates for my 2wheel drive dump truck
    the truck is a 89superduty daul rear wheel it has leefspring in the front
    i will take a complete set up or just plates and 460 pulley
    let me know my #603 689 8739
     
  14. deathwish

    deathwish Junior Member
    Messages: 6

    mistake

    the push plates i need are for a 89 ford f series super duty f450 2 wheel drive the front end is a leef spring strait beem axle let me know if you have theses parts ps also need 460 efi pulley & pump bracket for this year thanx #603 889 6363
     
  15. plowman6977

    plowman6977 Junior Member
    from 17042
    Messages: 7

    pushplates

    fisher or diamond??
     
  16. mikelawtown

    mikelawtown Senior Member
    from Mass
    Messages: 429

    I need the truck bottom mount for an 88 s10 blazer or p/u (fisher)hydro. or ill be selling the complete setup i have lights, head unit, lift arm, cables, valve body, joystick and belt pump...
     
  17. musky@snet.net

    musky@snet.net Junior Member
    from eastern
    Messages: 0

    live in ct ,need older plow pump ,fisher,under hood

    rebuild kit or pump 94 f350 diesel belt driven pump,firewall mount resivior, and does a diesel run a smaller pulley
     
  18. musky@snet.net

    musky@snet.net Junior Member
    from eastern
    Messages: 0

    need older fisher pump seperate fluid tank 95 ford diesel

     
  19. daninline

    daninline Senior Member
    Messages: 430

    Have any of you been contacted by this person?

    I asked if he had someting on 11/30 and never got an responce is it just me?
     
  20. plowman6977

    plowman6977 Junior Member
    from 17042
    Messages: 7

    plow

    daninline-- you said older set up is it a unimount or old standard mount??