1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

painfully slow angle and wont hold angle on e60

Discussion in 'Meyer / Diamond Products Discussion' started by trqjnky, Feb 5, 2010.

  1. trqjnky

    trqjnky Senior Member
    Messages: 620

    to angle left and right on my e60 takes a ridiculous amount of time. and then it wont hold the angle, it just angles side to side depending on whatever side has the most resistance against it.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    1) Low fluid level
    2) Bad O-rings on C valve
    3) Blown cross over relief valve. (most likely)

    Follow the manual here for disassembly info.
     
  3. trqjnky

    trqjnky Senior Member
    Messages: 620

    i would normally fix it myself, but what about setting the relief pressure?
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Setting the cross over relief requires a 4000 PSI minimum gauge plumbed inline of an angle hose. If you don't have a guage or a means to check it just get the adjustment screw approx were it was and see how it works. When time permits then you can head over to your local hydro shop or plow dealer for a more precise check and set.