1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

organized

Discussion in 'Equipment, Tools & Vehicle Pictures' started by ljbev, Nov 30, 2007.

  1. ljbev

    ljbev Senior Member
    Messages: 190

    I wish I could organize the rest of my life like this!!!!
    P.S. This was a few years ago I upgraded the blower and have hired other guystoto use it
    P1010047.jpg

    P1010048.jpg

    P1010049.jpg

    P1010050.jpg

    P1010051.jpg

    P1010047.jpg

    P1010048.jpg

    P1010049.jpg

    P1010050.jpg

    P1010051.jpg
     
  2. ram4x443015

    ram4x443015 Senior Member
    Messages: 138

    dose it look like that at the end of a snow run
     
  3. ljbev

    ljbev Senior Member
    Messages: 190

    yea

    You want me to lie? Well actually the crossbeams are cut and interlocked so it stays pretty well. Main purpose is not to rip the bags of calcium and keep the blower where I can grab it form the ground with less ups and downs.
     
  4. Supper Grassy

    Supper Grassy Senior Member
    Messages: 948

    Nice set up
     
  5. MStine315

    MStine315 Senior Member
    Messages: 144

    That's pretty cool. May have to do some fabricating after this storm. Thanks for the ideas.
     
  6. deere615

    deere615 2000 Club Member
    Messages: 2,919

    Nice setup, my dad has that same snow blower. I like the light you put on it! I think I new to build something like that for my truck.
     
  7. New Heights

    New Heights Senior Member
    Messages: 141

    Looks like you have every thing covered there except some ramps that snow blower.
     
  8. frndinalowplace

    frndinalowplace Senior Member
    from 7hills
    Messages: 142

    Looks great. Nice idea. He does have ramps, they are part of the sides.
     
  9. New Heights

    New Heights Senior Member
    Messages: 141

    Duuuuur....I didnt see that. Well then even beter, great idea.
     
  10. PA-plow-at-home

    PA-plow-at-home Member
    Messages: 59

    How did you add the light to the snowblower?
    What powers that light?
     
  11. ljbev

    ljbev Senior Member
    Messages: 190

    light

    since some models with same motors offer a light engine comes prewired with a stator and llive lead off the back of the motor. All you need to do is ground the light back to the motor