1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

On Up Controller Defaults Meyer E60

Discussion in 'Meyer / Diamond Products Discussion' started by CLeslein, Dec 29, 2015.

  1. CLeslein

    CLeslein Member
    Messages: 34

    Each time I hit the up button hand controller goes into default. Can anybody guide me in the right direction please.

    Thank you.
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,749

    Short, bad coil, bad controller.
    Try Meyer's website for there troubleshooting section.
  3. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,179

    Up will be red wire at B coil. This where I would start. At the pump swap the red and green wires and see if the fault moves to right function on control. If it does it is most likely B coil, if it doesn't switch you have a wiring issue.
  4. jmassi

    jmassi Senior Member
    Messages: 154

    Double check your ground.
  5. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    every time mine did that, it was a bad ground.