1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

old western motor/pump out of storage

Discussion in 'Truck & Equipment Repair' started by ramcharger, Jan 28, 2010.

  1. ramcharger

    ramcharger Junior Member
    from MN
    Messages: 1

    Hello all

    I bought and old western set up that hadn't been used for many years.
    Could not get motor to engage and cables bad.
    Some one has another set up, been in dry storage for years.
    Is there things I can check before I buy to make sure it still works ?
    He just has the pump/motor, cables and controler in his shop.
    Thanks
    Newbie
     
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239

    isa mark iii

    i assume this is just the power unit only ,if so about all you can do is make shure it has oil and ground the motor and put 12 volts to the power stud and see if the motor runs .you will have to put it on some thing and try it other wise ,good luck ! :)