1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Old HD plow to new multiplex

Discussion in 'Fisher Engineering Discussion' started by durafish, Feb 13, 2013.

  1. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    So i have a regular mm2 3 plug straight blade but want to be able to run the new 2 plug plows. What would i have to add to make this possible. If i could have part # then that would be great too.
    Also if i change the truck side control harness's to a 7 pin (i think) could i run the ezv?
    For the people that are thinking im going to go around and steal plows this is not my intentions.Thumbs Up
    thanks.
     
  2. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    You will need the multiplex power cable 42014 and the control harness 28587 plus a controller. I have the wiring if you want it.
     
  3. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    ez v all you need is the control harness 26346 plus a controller
     
  4. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    Thanks how much do you want for it.
     
  5. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    150 bucks shipped
     
  6. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    ok ill think about it because it can get all new for less then $180. Now how would i make it so i can use my plow and a XLS.
     
  7. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    Do you have a 3 or 4 port module?
     
  8. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    I have the 4 port.
     
  9. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

  10. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    ok whats the y connector do?
     
  11. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    the y connector is not something that you can buy from Fisher as far as I know, you have to make it. It allows you to have both systems active. When you have both systems on your truck in order to use the one you need, you have to unplug the harness and plug it in to the light harness.
     
  12. durafish

    durafish PlowSite.com Addict
    from 02919
    Messages: 1,092

    So it just makes it so you don't have to manually switch between the two?
     
  13. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    Yes exactly repoman207 made me 1