1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Old Fisher HS 7ft Angle Cylinder Part #???

Discussion in 'Fisher Engineering Discussion' started by SalvageTitleTJ, Feb 7, 2012.

  1. SalvageTitleTJ

    SalvageTitleTJ Junior Member
    Messages: 22

    Running an old convential mount 7ft Fisher HS. I need a replacement angle cylinder but they are so old and pitted I cannot get a part # off of it.
    - It is 1.5 diameter cylinder with non o-ring fittings.
    - Closed length measurement from center pin to center pin is 17.5"
    - Closed measurement from packing nut to center eye is 16"
    - I know it is not part # A3660 that cylinder measures 2" to long.
    Any help would be appreciated I have not been able to find any part # info for the old HS cylinders.
     
  2. SalvageTitleTJ

    SalvageTitleTJ Junior Member
    Messages: 22

    In case anyone ever runs into this problem the older HS series plows 7ft and under run lift cylinders as angle cylinders. part# 20116K