1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

oil change ??

Discussion in 'Fisher Engineering Discussion' started by bru z71, Oct 31, 2010.

  1. bru z71

    bru z71 Senior Member
    Messages: 121

    i changed my oil yesterday i have a mm2 7.6 is it bad that i filled it up from the breather plug ? after i got the air out i kept topping it off threw the breather i did it like 10 times so my ? is it bad that i topped it off from the breather ?
    i had no problem goin up and down left right etc
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Doesn't matter how you fill it, it all goes in the reservoir.....
     
  3. bru z71

    bru z71 Senior Member
    Messages: 121

    is there a point where you can put to much in ? bc i put the fill plug back in and filled it again from the breather and then ran it air came out then i filled it like 10 times
     
  4. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    take out the fill plug on the res and fill the res up until the fluid is at the top of the filler plug hole and that will be fine if its over full you will know when you remove the plug on the res it will be leaking all over the place
     
  5. bru z71

    bru z71 Senior Member
    Messages: 121

    So would it be bad if I over filled it ?
     
  6. TONY labounty

    TONY labounty Junior Member
    Messages: 11

    yes-it could damage motor
     
  7. bru z71

    bru z71 Senior Member
    Messages: 121

    dam i am stupid