1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

no low beams

Discussion in 'Western Plows Discussion' started by skippy867, Oct 10, 2009.

  1. skippy867

    skippy867 Member
    Messages: 41

    i just put a western mvp on my truck. hooked up all the wire harness to thecorrect spot on my isolation moduel, but i dont have to low beams on the plow but i do have high beams. when i connect the plow my truck lights go off but the plows low beams dont. its mounted on a 03 chevy 2500hd 6.6. any thoughts on what could cause this? the bulbs dont appear to be burnt out.
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    3 port or 4 port?
    Do you have the correct module?
    Do you have the correct harness'?
    Are they plugged in correctly?
     
  3. skippy867

    skippy867 Member
    Messages: 41

    i have the 4 port moduel, yes its the right one and i tried it in differnt ports
     
  4. mrsnowplow45806

    mrsnowplow45806 Junior Member
    Messages: 3

    what color label on your module?
     
  5. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    should have iso 27781, short harness 26361, long harness 26360.
     
  6. mrsnowplow45806

    mrsnowplow45806 Junior Member
    Messages: 3

    call me at 419 234 0720