1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

No Lift, Any Suggestions

Discussion in 'DownEaster' started by Bruce'sEx, Dec 22, 2008.

  1. Bruce'sEx

    Bruce'sEx Senior Member
    Messages: 873

    So here is the case, Couple days ago had no lift, This truck sits out in the cold.
    Put it in the shop to check it over, after it warmed up lift was fine. So we flushed the oil thinking water. That seemed to work. Until today, was working, then stopped. Motor is getting power, everything seems to be the same case as it was the first time. It's in the shop now warming up to test the theory.

    Likely going to flush it again, and hope. Any other suggestions would be nice. Also it came with ATF in it. Considering putting hydraulic in it. this a bad idea for any reason?
     
  2. Bruce'sEx

    Bruce'sEx Senior Member
    Messages: 873

    So 20 mintues in the shop and it works again, As far as I figure, first flush must not have gotten all the water out. or it's to cold for the atf to flow well. Was thinking of puting the fisher blue oil in. same as the plows