1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

No anlge only up

Discussion in 'Truck & Equipment Repair' started by jaybe_2, Jan 16, 2008.

  1. jaybe_2

    jaybe_2 Junior Member
    from NH
    Messages: 1

    Plow will go up and down as intended but when you try angle it left or right it just goes up wont go side to side at all. It started having no angle to the right and now has no left. any thoughts? This is a diamond plow with a touch pad.
  2. ChevKid03

    ChevKid03 Senior Member
    Messages: 505

    So your saying when you press right or left it's going up?? not sure, but sounds like a controller... do you know anyone else's you can try?
  3. Burkartsplow

    Burkartsplow PlowSite Veteran
    Messages: 3,248

    ask B and B. he will know what the problem is...
  4. bossplowguy

    bossplowguy Senior Member
    Messages: 214

    What pump does it have on it?
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If it raises instead of angling left or right then either the TP is bad or the B valve is stuck open..

    Easy to test though...

    Run a 12V jumper from the battery to the small activation post on the under hood solenoid. (should have a white wire on it) Touch the jumper to the activation post BE READY FOR BLADE MOVEMENT!!

    When you touch the post which way does the plow go?

    UP = stuck B valve
    Left = bad touch pad