1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

nite saber lite help!

Discussion in 'Meyer / Diamond Products Discussion' started by toddon22, Jan 20, 2010.

  1. toddon22

    toddon22 Member
    Messages: 71

    I have my meyer nite saber snow plow lights working to the point that when my daytime running lights are on so are my plow lights at low intensity. But when I turn on my plow light switch to turn on my plow lights at full intensity nothing happens, my truck low beams will work but my plow lights wont. Does anybody have any suggestions on to what I should do to get my plow lights working when not in daytime running light mode?
     
  2. bossman1352

    bossman1352 Junior Member
    Messages: 10

    The question is, is the plow new for the truck, or has this set up worked correctly before. I had a problem with mine when it was new. The dealer gave me the wrong light harnesses and when I had my switch on, only the high beams would work. I harnesses fit, but the wires were reversed, and with the right ones the lights worked fine.
     
  3. Booman70

    Booman70 Senior Member
    Messages: 108

    Sounds like it is wired wrong