1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Newb in need of help

Discussion in 'Truck & Equipment Repair' started by jonmclemore, Nov 13, 2009.

  1. jonmclemore

    jonmclemore Junior Member
    Messages: 1

    Brand new to this biz, bought some used equipment, truck, plow, etc. Got everything I need, climbed under my truck to see about installing my unimount. Found that the guy who had this truck before me welded a bunch of heavy plates onto the frame for his plow mount. Before he sold the truck, he just cut his mount off leaving the plates. I'm pretty sure my mount will not go on over this junk. Any suggestions on how to get this off or another option? I thought about a cutting torch, but it would be easy to wreck the frame if one wasn't careful/skilled. I have a grinder, but that would take forever.
     
  2. ScottPA

    ScottPA Senior Member
    from PA
    Messages: 170

    Hmm I would just grind the old welds...if its worth doing..its worth doing right.
     
  3. NorthernSvc's

    NorthernSvc's Senior Member
    Messages: 766

    have a welder weld the new mounts on...
     
  4. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    A good welding shop should be able to torch them off quickly