1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

New to me 01 Dakota, need help identifying existing plow mount and controllers

Discussion in 'Equipment, Tools & Vehicle Pictures' started by expressonate, May 5, 2015.

  1. expressonate

    expressonate Junior Member
    Messages: 4

    Hello, I just bought a 01 Dakota 4 door for peanuts. Decent shape too. It has a plow mount, controler wiring, and hydrolic pump wiring. Everythings intact, and well done. It was a plow truck out in Colorado for a small town parks and rec department and got light use clearing walking paths and doing landscaping work. When they auctioned the truck, the plow and controler were removed, and the servicerecords dont indicate what brand anything was. I cannot see any brands anywhere to identify what I have...

    Any ideas are appreciated. It was installed in 2001, and would have been a USA brand plow (The town has a union ran maintiance shop, they really did well on this truck)

    Thank you for the help, and thanks for allowing me on the forum.
    ~Nate

    image.jpg
     
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    That is a Snoway Three pin mount for a 24 series Snoway plow.