1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

new salt dog 2yd poly

Discussion in 'Ice Management' started by craftmasters, Jan 11, 2010.

Thread Status:
Not open for further replies.
  1. craftmasters

    craftmasters Junior Member
    Messages: 13

    hey i was wondering if anyone knew where or if there are any grease fittings on this unit i dont want anything to lock up?
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Do you have an owner's manual? I bet it's right in there.....
     
  3. ghost

    ghost Member
    Messages: 65

    right in the middle under the hopper at the back of the siler part. its the only one I found
     
  4. ghost

    ghost Member
    Messages: 65

    You are wrong Its not it the manual. Look before you leap
     
  5. craftmasters

    craftmasters Junior Member
    Messages: 13

    not much of a manual for these things thanks tho ill look
     
  6. framer1901

    framer1901 Senior Member
    Messages: 813

    The auger has a bearing at the front of it. Nothing right about it but about 300 ton has been thru mine with the factory lube job, the zerk was in there and couldn't get a grease gun on it......
     
  7. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Interesting...
    Found the manual in about 10 seconds on their website.

    http://www.saltdogg.com/Instruction Sheets/3012897_Rev_A.pdf

    Page 4 under "Maintenance" says to grease the auger bearing after every 20 hours of use. Pages 6 & 7 show pretty clearly where the bearing is located.

    I didn't see anything re: the gearboxes. They must be sealed units?
     
  8. craftmasters

    craftmasters Junior Member
    Messages: 13

    o ok good thanks ill look that up they didnt come with one
     
  9. Charles

    Charles Moderator Staff Member
    Messages: 256

    Questioned answered. :gunsfiring: Stopped. Thread closed
     
Thread Status:
Not open for further replies.