1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

New question

Discussion in 'Commercial Snow Removal' started by Garbycar, Nov 5, 2003.

  1. Garbycar

    Garbycar Junior Member
    from midwest
    Messages: 5

    Hey again,
    Apparently no one knew the answer to the question before BUT that's O.K. I figured it out ! Here's one that will send you plowing farther north than me! Ready.... My shaft seal is 3/4 O.D. and the I.D. is aprox.3/8 Every seal I try to purchase it is at least a 1/4 inch to big! What's going on???? I have a Meyers E-46 and Meyers does not show any other options:help: Waiting for a reply and thanks in advance
    Bob
     
  2. Big Nate's Plowing

    Big Nate's Plowing PlowSite.com Addict
    Messages: 1,266

    can you look at this diagram and tell us what the number is?
    [​IMG]

    then we will know what the exact part is
     
  3. Garbycar

    Garbycar Junior Member
    from midwest
    Messages: 5

    The number is 10

    Thanks
     
  4. Big Nate's Plowing

    Big Nate's Plowing PlowSite.com Addict
    Messages: 1,266

    AFAIK all of the e-46-46h-47-47h all use the same pump, you might have a e-60 seal.
     
  5. Garbycar

    Garbycar Junior Member
    from midwest
    Messages: 5

    I'm not sure but i can tell you it is old and works very well, except for that darn leak . Well thanks anyhow and if you come up with anything please reply
    Thanks again
    Bob