1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

New Plow rig!

Discussion in 'Commercial Snow Removal' started by kawdude, Jan 17, 2003.

  1. kawdude

    kawdude Senior Member
    Messages: 105

    I am now plowing with a 1976 Chevy luv Pickup 4 banger, with a boss V plow, and 1000 lbs of ballast.

    Anyone think this is too heavy a plow? it is a 1/4 ton truck ya know!!

    :D just thought id bust on the 1/2 ton haters..........:drinkup:


    keep the snow coming!!!
     
  2. unclepaul

    unclepaul Junior Member
    Messages: 3

    kaw dude didnt i see your plow frame scapping the ground or was that your oil pan ?
     
  3. kawdude

    kawdude Senior Member
    Messages: 105

    trans pan, gonna get some timbrens...:D
     
  4. Mr_Roboto

    Mr_Roboto Member
    Messages: 63

    Put in heavier coils, that'll convert it to a 1-Ton truck!
     
  5. windmill

    windmill Senior Member
    Messages: 224

    Good thing it's a 4x4 that way when the plow is up and the back wheels are in the air you can still move. Must be hard to stear though. :D :D :D Just Kidding but the picture it presents kind of makes me chuckle.
     
  6. rick barnes

    rick barnes Member
    Messages: 61

    LUV ??

    I'd like to see a phot of this one,

    PLEASE post a photo if you don't have a camera borrow one, steal one or something, Please

    A BOSS V on a 1/4 RIPLEYS where are U
     
  7. fordman

    fordman Senior Member
    Messages: 327

    Same here I'd love to see a picture of this setup.:nod:
     
  8. nsmilligan

    nsmilligan PlowSite.com Veteran
    Messages: 704

    Me Too, WITH THE PLOW RAISED!

    bill
     
  9. jakegypsum

    jakegypsum Senior Member
    Messages: 101

    :D

    I'm under the impression that the raise/lower function, when operated, is for raising & lowering the rear end of the truck? :).
    I would have to believe that the plow edge stays on the ground all of the time. I guess the power angle helps when making a turn. Lol. :eek: :D
     
  10. kawdude

    kawdude Senior Member
    Messages: 105

    Instead of plow shoes it has hydraulically operated casters under the plow to raise.:D