1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

New Motor on old E-60 pump

Discussion in 'Meyer / Diamond Products Discussion' started by archer39, Jan 3, 2009.

  1. archer39

    archer39 Member
    from PA
    Messages: 62

    My motor went on my e-60 so i ordered one from angelos. the motor i received was the newer style with two electrical connection post. they are labeled as D1 and D2. I would assume one is positive and one is negative. anyone know which one is which?
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Actually they should be labeled A2 and D1....

    A2 is your positive power and D1 is your ground.
     
  3. archer39

    archer39 Member
    from PA
    Messages: 62

    yep that's what it is lol duh. thanks a lot
     
  4. archer39

    archer39 Member
    from PA
    Messages: 62

    well after a second look it is in fact D1 and D2...

    still don't know which is which.
     
  5. lawnmedic

    lawnmedic Senior Member
    Messages: 703

    The motor case should be insulated on a 2 stud motor. Apply 12 volts both directions and see which way the motor runs.
     
  6. archer39

    archer39 Member
    from PA
    Messages: 62

    which way is the right way? counterclockwise or clockwise? Sorry for all the stupid question, i just don't want to mess anything up.
     
  7. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Must be a generic motor.



    Needs to turn clockwise.