1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

new mm2 pushplates different?

Discussion in 'Fisher Engineering Discussion' started by judgejp, Oct 29, 2010.

  1. judgejp

    judgejp Junior Member
    from Mass
    Messages: 4

    Just bought a pecular pushplate kit for my f250. I noticed that the "ears" are different from the the older pushplates. specifically the old plate ears had a square spacer welded to both sides of the ears with the hole thru for the pin. The new plate ears only have the square spacer welded to one side. Whats up with that. it seems like they are thinner. Did they give me the wrong ones?
     
  2. tractorbill

    tractorbill Member
    Messages: 65

    the new plates only have the "spacer" on one side now. They are correct.
     
  3. judgejp

    judgejp Junior Member
    from Mass
    Messages: 4

    Thanks tractorbill. Already mounted and torqued before I noticed. Got me a little worried
     
  4. tractorbill

    tractorbill Member
    Messages: 65

    what year is your 250?
     
  5. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Bean counters making decisions.......
     
  6. judgejp

    judgejp Junior Member
    from Mass
    Messages: 4

    its is a 2011
     
  7. tractorbill

    tractorbill Member
    Messages: 65

    did you make sure you spaced your cooler lines out?
     
  8. judgejp

    judgejp Junior Member
    from Mass
    Messages: 4

    i did and tie wrapped around the frame as per install instructions. didnt feel like they could move that much to rub but did it anyways.