1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

needs help now!!! e-60

Discussion in 'Commercial Snow Removal' started by baddboygeorge, Jan 22, 2003.

  1. baddboygeorge

    baddboygeorge Senior Member
    Messages: 237

    i have an e-60 meyers power unit an need to rpleace the cylinder housing cover an seal an it needs new fluid .where do i drain an fill please let me know asap hell its snowing thanks
     
  2. Rob Abner

    Rob Abner Junior Member
    Messages: 25

    If you need to replace the seal on the top of the lift cylinder you can ramove the lift arm, take out the fill plug and just flip the whole pump down to drain, then remove top plate and gasket and replace.
    Make sure to fill within 1 1/2" of fill plug.
     
  3. Big Nate's Plowing

    Big Nate's Plowing PlowSite.com Addict
    Messages: 1,266

    whats the point of trying to drain it if you are going to pull the cylinder cap off? just undoo the bolts take the top off and dump the oil in a 5 gallon bucket to recycle, after re assembly fil it up thru the plug that the red arrow points to you need a 9/16" box end wrench for the plug;)

    ~Nate~

    [​IMG]