1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

need to isolate plow controls in wiring harness

Discussion in 'Fisher Engineering Discussion' started by das fisch, Oct 21, 2009.

  1. das fisch

    das fisch Junior Member
    from maine
    Messages: 25

    I have an old MM1 3 plug setup, and I need to isolate just the plow motion controls from the joystick to the 4 prong trailer type plug from the rest of the wiring harness. I do not need the light controls anymore, just the control for left/right/up/float.
    Has anyone done this and could share some info? I have the 12v power wire and two others from out of the plug isolated thus far, one other goes to the solenoid, the other two go into a complete maze of relays and whatnot.
    any and all help would be GREATLY appreciated!!!
    thank you