1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need some help!!! ANYONE

Discussion in 'Western Plows Discussion' started by Mackman, May 20, 2011.

  1. Mackman

    Mackman PlowSite.com Addict
    from S.E. PA
    Messages: 1,356

  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    After you drill the holes for the easy out stick the unit in the oven and cook it to about 250/300 degrees. the bolts will come out much easier. With the price and limited availability of Acetylene you can not afford to heat it with a torch.

    I suggest you do this when your wife/significant other is not home:laughing::laughing:

    You need any more parts I'm right down the way, we stock plenty of western parts.
     
    Last edited: May 21, 2011
  3. randomb0b123

    randomb0b123 PlowSite.com Addict
    from america
    Messages: 1,278

    i will try to get you a pic of that jackstand deal later today
     
  4. Mackman

    Mackman PlowSite.com Addict
    from S.E. PA
    Messages: 1,356

    Basher are you a western dealer?? I might be down to get some parts. IF you can get the bolts out i will be more then happy to bring it to you.
     
  5. Mackman

    Mackman PlowSite.com Addict
    from S.E. PA
    Messages: 1,356

    Yea that would help alot. Thanks again
     
  6. randomb0b123

    randomb0b123 PlowSite.com Addict
    from america
    Messages: 1,278