1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

need part #s for 2plug to 3 plug conversion.

Discussion in 'Fisher Engineering Discussion' started by sweetk30, Jan 3, 2008.

  1. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    i have a sehp mm1 2 plug. the guy that wants to buy it has 3 plug setup. whats needed?
     
  2. Buster F

    Buster F Senior Member
    Messages: 208

    You will need a set of 11 pin lights (they do make a harness to convert your existing lights to 11 pin but it costs almost as much as a set of new takeoffs from your fisher dealer which are $150-$175) and harness # 26359 also available at the dealer for about $50. Very simple conversion that can be done in less than a hour. Good luck, Roy
     
  3. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    thank you sir vary much.
     
  4. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    i had a chance today to talk to the local fisher dealer.

    light conversion kit # 26347 for about 103 is cheeper than lights.

    and plug kit part # 26359 for around 58 bucks .

    just some good info to have on hand.
     
  5. Buster F

    Buster F Senior Member
    Messages: 208

    Thanks for the info. My thinking when i did my conversions was that my 7 pin lights if left intact had more than enough value to offset the difference in price between the conversion harness and a new set of takeoff 11 pin lights which i bought for $175 from my dealer. As it turned out i was right and sold my 7 pin lights for $150 (turns out that these lights are quite expensive w/the 2 plug harness) thus only costing me $25 and quite a bit less labor to install. Just a little food for thought, Good luck, Roy
     
  6. mberthia

    mberthia Junior Member
    Messages: 4

    Hey, i got a set of three plug lights ill sell to you.
     
  7. killerrc51

    killerrc51 Junior Member
    from mass
    Messages: 7