1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need know if western plow and meyer plow's a frame are same.

Discussion in 'Western Plows Discussion' started by Milwaukee, Nov 1, 2008.

  1. Milwaukee

    Milwaukee 2000 Club Member
    Messages: 2,180

    I have 2 plows and they are different size.

    western is 6'6 and Meyer is 7'6

    Problem is Meyer plow look better and have new edge.

    Western have no edge and rusty plus broke trip springs.

    I need know if meyer's a frame will fit western mount.

    Let me know and DON'T POST USELESS POST. I am not call any dealer about that info.
  2. exmark1

    exmark1 PlowSite.com Addict
    Messages: 1,320

    I would think its going to be different just because of being a different make. However I would think there is a way to make anything work
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    No the Meyer A-frame won't fit a Western mount...unless you cut the pin attaching ears off the Western A-frame and weld them on the Meyer. Then it'll go right on.
  4. Milwaukee

    Milwaukee 2000 Club Member
    Messages: 2,180

    That one we could do. How thick weld bead we should have? My Uncle's brother is professor welder so I could ask him weld more strong bead.
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If you have access to a professional welder then it's a piece of cake. Let'em do it. wesport
  6. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    Can the truck handle a 7'6" plow?
  7. Milwaukee

    Milwaukee 2000 Club Member
    Messages: 2,180

    Yes it F150 but that plow came from 83 or 84 Bronco. I measure on F150 I knew snow would get in tires.
  8. Turf Commando

    Turf Commando Senior Member
    Messages: 567

    No doubt anything can be fabricated...