1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

need held identifying this mount

Discussion in 'Western Plows Discussion' started by 23bulldog, Nov 14, 2013.

  1. 23bulldog

    23bulldog Junior Member
    from Wi
    Messages: 4

    Hi guys, I'm hoping somebody can identify what vehicle"s" this mount would be for? It came with a standard 7' western plow and the guy that sold it to me lied about what it came off of so I'm stuck with it until I know what the mount is for. Thanks guys!
     
  2. 23bulldog

    23bulldog Junior Member
    from Wi
    Messages: 4

    plow.jpg Here's a couple pictures.

    plow.jpg
     
  3. 23bulldog

    23bulldog Junior Member
    from Wi
    Messages: 4

    plow1.jpg Here's another picture.

    plow1.jpg
     
  4. 23bulldog

    23bulldog Junior Member
    from Wi
    Messages: 4

    plow2.jpg I really hope somebody knows what this will fit... Thanks again.

    plow2.jpg
     
  5. Western1

    Western1 Senior Member
    from MI.
    Messages: 674

    Not really sure what it fits. But it is a western mount that has been changed or fabricated to fit something else then what it was originally intended to fit.
     
  6. nealybird

    nealybird Senior Member
    Messages: 713

    I've never seen anything even close to that. It almost looks like it was made completely from scratch, but hard to tell with these small pics. what did he say it had been on?
     
  7. It came from a chvfrddge. aka hodge-podge.

    So what do you need a mount for?

    Regards,
    SPW Tech

    www.snowplowpartswarehouse.com "Home of Western,Boss,Meyer O.E.M."

    Proud sponsor of Plowsite
     
  8. Sharpcut 1

    Sharpcut 1 Senior Member
    Messages: 386

    Anyone notice it's bent to hell on the drivers' side?