1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need Fisher/Western Pump housing

Discussion in 'Truck & Equipment Repair' started by bigblockford79, Dec 14, 2008.

  1. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    The housing on my fisher plow is broken and I need a replacement. It is a cable operated Isarmatic with the 10" lift cylinder. I would like just a housing for my existing set-up but if anyone have a complete set-up for a decent price I would do that too.

    Thanks
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    so it looks like this???

    pump.jpg
     
  3. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    yes that is exacly what the one. Do you have one?
     
  4. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Sorta...I came across a SEHP style, but I almost positive all you have to do is swap out the manifolds, and it is identical. I'll look into it in the morning for you.
     
  5. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    Ok, thanks. What price are you looking to get for it? Money is a little tight, which is why I can't afford new, and unfortunately snow still needs to be moved. I should be able to figure a way to get the solenoid version to work.

    Also, were are you located?
     
  6. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Not sure man, it's a friend of mine. I'll have to talk to him. I here ya.....$$ is crazy right now, not to mention its XMAS time to boot. Whats wrong with yours?
     
  7. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Cant just swap out a manifold from a shep to make it a cable op pump. Some work sith some wires and a controler and you would have a upgraded unit though.
     
  8. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    Mine is broken where the lift valve screws in. Just bought it used and was able to plow 2 times before whatever BS repair job the other guy did broke.
     
  9. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    $453 for the housing......not too bad in my mind. It's $1300 for the whole thing. CPW
     
  10. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    That is a good deal but unfortunately its out of my price range right now. Not to mention I would have to buy a controller for the truck to make it work.

    Thanks Again
     
  11. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    BB, where in MI are you?
     
  12. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    I am in Hamilton
     
  13. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    Repo, sent you a message. Still may need the pump
     
  14. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Norwalk, no message here chief. I have yet to talk to my guy yet though. I left a few messages earlier about something else. I shall get back to you.
     
  15. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    Is there a way to send a private message on this site? I don't really want my cell number out on the net.
     
  16. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    yup yup, click on my RepoMan207, a drop down menu appears, "send a private message to RepoMan207" . Not sure if you can send them yet though, I can't send one to you.

    Email me RepoMan207@aol.com if you'd like.
     
  17. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    can't PM for some reason. Oh well sent email.
     
  18. sechracer

    sechracer Senior Member
    Messages: 478

    Do just one more post in this thread one more time you will be able to PM.

    Need 10 posts
     
  19. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    C'mon Man....you can do it......Your almost there! Get Ur Done!
     
  20. bigblockford79

    bigblockford79 Junior Member
    Messages: 15

    Sweet, I can now send PM's

    Edit: Actually still can't send PM's even w/ 11 posts :(
     
    Last edited: Dec 15, 2008