1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need 72-93 dodge help

Discussion in 'Truck & Equipment Repair' started by Edgewater, Apr 8, 2008.

  1. Edgewater

    Edgewater Member
    Messages: 70

    Hi,

    I am putting a 1992 dodge d-250 back together. It is obvious from the paint marks, the the front fenders go inside the front skirts or inner fenders. that is how it was when I took it apart.

    IE when you look at the truck, you see the lip on the fender, and then sticking down below that and overlapping by about 1/2 the width, is the inner fender or skirt.

    Is that correct, I cant imagine that that is factory. On all the other trucks I have ever worked on, the inner fender is behind the lip of the outer fender.

    Can anyone confirm this....
     
  2. g.moore

    g.moore Senior Member
    Messages: 164

    1975 Powerwagon, wheel wells had nuts welded to them so the bolt went through the fender then threaded into the wheel well.
     
  3. Kennedy81

    Kennedy81 Senior Member
    Messages: 125

    I'll look at my '92 W250 tommorow... don't think it hangs down like that...