1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

My Strobe light...

Discussion in 'Commercial Snow Removal' started by Heron Cove PM, Dec 3, 2003.

  1. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    I thought some may want to see this. Maybe to get an idea or two. If nothing else I know you all like pics.

    The first is parts that I made from some scrap aluminum.

    #1

    107_0765.jpg
     
  2. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    #2 is of the light starting to come together...

    107_0764.jpg
     
  3. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    #3 is the light done ready to install...

    107_0766.jpg
     
  4. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    #4 I made this light for my dump insert. I want it to stay level when the bed raises up...

    107_0767.jpg
     
  5. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    #5 installed on the truck...

    107_0771.jpg
     
  6. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    #6 and last the dump up in the air....

    107_0772.jpg
     
  7. JohnnyU

    JohnnyU 2000 Club Member
    Messages: 2,040

    That is a very good looking auto leveling mount! What ECCO model is that, a 6660? :drinkup:
     
  8. Heron Cove PM

    Heron Cove PM Senior Member
    Messages: 202

    Thank you and Yes.:nod:
     
  9. sos

    sos Member
    from NE Ohio
    Messages: 53

    Looks good. Is it loose enough to be rocking while driving? Just thinking while plowing that it would be rocking back and forth.:confused:
     
  10. Eyesell

    Eyesell 2000 Club Member
    Messages: 2,101

    You can probably tighten up the screws on the side to ease the rocking or put some nylon washers in there, with them you won't have to worry about rust :( Love the idea, very cleaver, thanks for the pics, your right I love good ideas.

    Thanks again !! :)