1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

My plow mount for 94 jeep

Discussion in 'Jeeps' started by Yotetalker, Dec 17, 2009.

  1. Yotetalker

    Yotetalker Junior Member
    from Indiana
    Messages: 3


    Heres what I got so far:
    2-- plate 3/8 thick by 22" x 6"
    2 --1 1/2 tube smashed on each end for braces
    1-- 2x3 square tube

    This going to be used for a western UNI Mount. figured the plates mount to frame an the tube used for a brace from frame to plates, then the tube for the plow to hook to useing the original a brackets....Pump mounts to the top of frame rail behind my tubular bumber.
    So what you think...after I get built this weekend I will show some real pics of this setup..I needed something that I could unbolt without haveing to take leafsprings undone everytime....
  2. theplowmeister

    theplowmeister 2000 Club Member
    from MA
    Messages: 2,511

    I would run a diagonal from the large brace up to the lower bumper mount. AND since you can rip out the lower bumper mount run a brace around the bumper to the upper bumper mount.