1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

My mechanic went to sing-sing :(

Discussion in 'Truck & Equipment Repair' started by keithnh, Sep 13, 2009.

  1. keithnh

    keithnh Junior Member
    from NH
    Messages: 1

    Paid a guy to install a meyers plow setup on my 77 plymouth trailduster. He got thrown in the slam and left me hanging. Ive been fiddling with the truck which now has wires cut here and there, twisted onto others by the ballast resistor and some little square black electrical box bolted to the intake near the coil on an electronic ignition early 360. I cant get it to keep running and was wondering if anyone might know if the box is to a meyer plow setup control and what the wiring diagram might look like. Wires are hanging loose, I just cleaned the ecu by taking it off and a wire fell off i think was being grounded by the ecu to firewall joint. I HATE screwed with wiring.
  2. D.todd6

    D.todd6 Member
    Messages: 35