1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Moving ultra mount from 03 to11 super duty

Discussion in 'Western Plows Discussion' started by Shade Tree NJ, Sep 22, 2016.

  1. Shade Tree NJ

    Shade Tree NJ Senior Member
    Messages: 197

    Currently have an 03 f350 super duty with a 3 plug / 4 port iso mod ultra mount. Looking into getting a newer plowing truck, found a 2011...

    Worth removing mount and wiring from my current truck to move over to new one...will it even work?

    Thanks in advance!
     
  2. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,853

    No idea about the wiring, but the mount won't work. The frame changed betwixt '04 and '05, from leaf to coils.
     
  3. Shade Tree NJ

    Shade Tree NJ Senior Member
    Messages: 197

    Thanks for the reply
    Didn't think I would be that lucky
     
  4. Randall Ave

    Randall Ave PlowSite.com Addict
    Messages: 1,959

    Frame is different, Headlamps will be different, pretty sure. Keep your old controller and just get all new truck side.
     
  5. nealybird

    nealybird Senior Member
    Messages: 714

    you could reuse a couple of hundred bucks worth of wiring if it's still good. all the wiring should add up to about $550, whereas just a 3port module and headlight harness kit will just be $300 or so.