1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Moving BOSS mount to a higher position

Discussion in 'Boss Plows Discussion' started by Fjtort2, Jul 28, 2015.

  1. Fjtort2

    Fjtort2 Member
    Messages: 64

    Currently my BOSS mount is at the lowest position. With only four bolts on each side (two height wise). To me I need at least three high for a nice rigid mount. What do I need to adjust on blade to make it work? DXT 8'2
     
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,535

    the A frame needs to be level regardless of looks to have good cutting and wear on the edges. As far as i know, Boss plows cant be adjusted like a Western
     
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,976

    Measure the mount first. 1_2 holes might be enough