1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mount help

Discussion in 'Western Plows Discussion' started by dieselpusher, Oct 1, 2009.

  1. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    does anyone know the maximum ground to bumper height you can have to run a plow from this manufactuer.
    i have 24 inches from ground the bottom fairing of my 01 dodge ram 2500

    can a plow work on this...
     
  2. Western1

    Western1 Senior Member
    from MI.
    Messages: 676

    More important from ground to bottom of frame. Not sure but if you run the ultramount there are adjustments to compensate for that.
     
  3. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    bottom of the truck frame or plow frame
     
  4. Western1

    Western1 Senior Member
    from MI.
    Messages: 676

    Western mechanics guide allows up to 19" from top of receiver bracket which should be about 4" or so below the frame?
     
  5. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    damn i dont know if this will work.
     
  6. Western1

    Western1 Senior Member
    from MI.
    Messages: 676

    You have to think that there is some leeway in those numbers.
     
  7. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    yeah true.
    im gonna bring it to the dealer tomorrow or next week and go from there
     
  8. cfdeng7

    cfdeng7 Senior Member
    from CT
    Messages: 376

    is your truck stock height? if it is your fine. even if ur lifted a couple inches u can compensate with the mount. if you are higher than 2 inches then u are probably going to need a custom mount fabbed up for ur plow to work right