1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Motor sticking

Discussion in 'Western Plows Discussion' started by larry1967, Nov 3, 2009.

  1. larry1967

    larry1967 Junior Member
    Messages: 7

    I just bought an old cable ISARMATICS Mark III plow. Sometimes the motor continues to run when raising or angling the blade. I have a hard time stopping the motor when the blade has reached it height limit or angle limit. The motor still runs even when the control is put in neutral. But when I worked on the plow in my garage, the motor shut off just fine? The truck has been sitting for about 2 yrs.
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Motor solenoid is sticking not the motor, change out the solenoid.
     
  3. larry1967

    larry1967 Junior Member
    Messages: 7

    I will change out and let you know.
    thanks
     
  4. larry1967

    larry1967 Junior Member
    Messages: 7

    Replacing the relay worked. Thanks. I need a snow flap for the top of the 7 ft 6in plow who has one in Michigan.
     
  5. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    i have a whole stack. pm if interested.
     
  6. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    His PM's wont work, hes short on post counts like your short on fingers!!!
     
  7. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    Rdrrrolfmaoblablabla.