1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Motor removal

Discussion in 'Western Plows Discussion' started by twbuild, Dec 25, 2012.

  1. twbuild

    twbuild Junior Member
    Messages: 6

    Ok, I am trying to remove the motor on my MVP. not sure if that is the problem or not but I have power to the motor but no action. I took the 2 bolts out of the top of the motor & it doesn't budge, is something else holding it in place?
     
  2. twbuild

    twbuild Junior Member
    Messages: 6

    I got it the 2 bolts are all that holds it on. Then the armature was stuck also. I put the armature back in to make sure the pump turns, all good there. The motor was stuck in place pretty good but a block of wood & a hammer tapping on the housing loosened it up.
    Reminder check it out before it gets cold out.