1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Moose plow on a Kawa Brute force 650?

Discussion in 'ATV / UTV Snow Removal' started by roadrnnr, Jul 26, 2008.

  1. roadrnnr

    roadrnnr Member
    Messages: 40

    Does any body have a Moose Plow on a Kawasaki Brute force 650?

    I can not seem to find a part number for this machine. Could it be they do not make them for the Brute Force?

    Seems unlikely.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Is it an IRS 650? If so, they use the same mount as a 750.

    Although Moose does make a mount kit for both the IRS and SRA 650's.
     
  3. roadrnnr

    roadrnnr Member
    Messages: 40

    I am looking at getting the single axle 650.

    Where did you see the mount's?
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Actually in a paper catalog, but Dennis Kirk has them on their website too.. DK

    Scroll down and click on "fitment"....p/n 514365
     
  5. ljrce

    ljrce Senior Member
    Messages: 182

    i ill be putting the 55 inch moose plow on mine for this winter hopefully i would go 50 inch but i want it to be as wide as my tires are
     
  6. roadrnnr

    roadrnnr Member
    Messages: 40

    You got a Brute Force 650?

    Was wondering how the Winch mounts on these, high or low?

    I had a problem with the Yamaha Kodiak I had cause the winch was mounted so low there was no room to pull the cable up high enough to get good clearance with the plow.

    Also I can't seem to find a part number for Mooses new qiuck connect mount. for the Brute Force.

    What Moose set up are you putting on yours if you have a Brute Force 650?
     
  7. ljrce

    ljrce Senior Member
    Messages: 182

    i have the 2007 kawasaki brute force 650i 4x4 and here is a pic of how the winch is u can see it in this pic a little if u want i can get u a better pic i am doing the moose
    4501-0028 bottom mount plate
    M93-11001 push tubes
    4501-0068 Yellow 55 inch Moose standard plow blade

    [​IMG]
     
  8. roadrnnr

    roadrnnr Member
    Messages: 40

    That looks real low like my Kodiak also.

    Do You think you will have to rig up a pully higher so you can raise the plow up enough before you run out of cable?

    I saw a video on You Tube where a Guy put a pully above the winch to get the cable higher. Not sure how he did it.
     
  9. ljrce

    ljrce Senior Member
    Messages: 182

    i think im going to have to rig up something once i order the parts and that then i will know more
     
  10. roadrnnr

    roadrnnr Member
    Messages: 40


    Check out this You Tube Video:

    http://www.youtube.com/watch?v=sez3raR3DkA

    This guy rigged up a pully some how.

    I am going to see if I can contact him and see what he did.

    Let me know what you did if you would. I am getting ready to buy a Brute Force in the next couple days.