1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm2 V

Discussion in 'Truck & Equipment Repair' started by bemcc1, Jan 19, 2015.

  1. bemcc1

    bemcc1 Junior Member
    Messages: 10

    Plow wasn,t working replaced solenoid plow will work 6 or so times and quit cross over solenoid and will work another 6 or so times any ideas.
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,970

    Motor getting hot, wires getting hot.
    Motor still run when it quits?
     
  3. bemcc1

    bemcc1 Junior Member
    Messages: 10

    No motor not getting hot
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,970

    Then you gotta Ck what your losing. Signal to the solenoid, or solenoid to the motor. Or motor itself
     
  5. bemcc1

    bemcc1 Junior Member
    Messages: 10

    Mm2

    checked all connections the new solenoid is just clicking cross it over than it works a few times than just clicks again.