1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 straight blade

Discussion in 'Truck & Equipment Repair' started by snomann, Dec 1, 2014.

  1. snomann

    snomann Junior Member
    Messages: 4

    I have a mm2 straight plow with the 6 pin fish stik, not getting any power to the controller, all that comes on is the backlight, any thoughts would be appreciated
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,963

    You have the plow hooked up correct?
    Ck all the fuses, should be 4.
     
  3. snomann

    snomann Junior Member
    Messages: 4

    The only fuse I can trace (red) is at the fuse box , and is ok, it seems to be the backlight for the controller, (?) the other wires plug to a 3 port isolation box under the hood ? Which says no serviceable parts, any ideas on location of the other fuses? Thanks in advance...newbie here
     
  4. snomann

    snomann Junior Member
    Messages: 4

    I have found the 4 fuses and all are good TY
     
  5. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,963

    Ok. And the plow is hooked up correct? All 3 plugs? Do your headlights change over from plow to trk if you turn them on?
     
  6. snomann

    snomann Junior Member
    Messages: 4

    Yes all 3 correct, and when I put lights on they are on the plow, not the truck Thanks