1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 Signals switched

Discussion in 'Fisher Engineering Discussion' started by tauan2007, Jan 13, 2009.

  1. tauan2007

    tauan2007 Junior Member
    Messages: 16

    I have a MM2 on a f250... I installed everything myself... everything works fine but the turn signals... When I signal left, the plow signals left, when i signal right.. the plow blinks both signal lights as if i pushed the alert button... If anybody has be through this please show me the ropes. thanks alot any helps appreciated.
  2. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Take the back of the lights and swap wires around.
  3. BSDeality

    BSDeality Senior Member
    Messages: 736

    check the bulbs and sockets for corrosion. I found I could get crossover or feedback sometimes when I wiggled the bulbs certain ways.