1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 no low beam lights

Discussion in 'Fisher Engineering Discussion' started by WOODY367, Feb 10, 2016.

  1. WOODY367

    WOODY367 Senior Member
    from LI, NY
    Messages: 468

    Ok during the last storm while sitting a tree limb came down and took out the passenger side Intensifire light. Only thing left were the bulb sockets. I bought a new light and installed it but no lo eam on the new one and lit on the otherside. Put on the high beams and all good. So I replaced the headlight bulb thinking it might be defective bu NG. I took off the plow tonight and now none of the truck low beams work and the high beams are ok, any ideas what wrong? Could somes
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,677

    Check truck fuse for low beams. Some vehicles have a fuse for each side some have one fuse for both.
     
  3. WOODY367

    WOODY367 Senior Member
    from LI, NY
    Messages: 468

    That is what was wrong. It has 2 fuses, 1 for each side. Must have blowen when the branch came down. Thanks for the help.