1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm2 no light on controller???

Discussion in 'Truck & Equipment Repair' started by fordpusher, Nov 8, 2013.

  1. fordpusher

    fordpusher Member
    from mass
    Messages: 31

    i have a mm2 and have no power at controller. seems like i have checked the fuse's 10 times, on truck side and the 2 near module. lights are working and when i jump the 2 red wires motor works

    what am i missing

    thanks
     
  2. fordpusher

    fordpusher Member
    from mass
    Messages: 31

    also tried a friends fish stick swell, same issue.. no power
     
  3. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,531

    is the plow connected to the truck
     
  4. fordpusher

    fordpusher Member
    from mass
    Messages: 31

    yes it is! i have 12 volts on the red wire ( from controller to purple in factory loom)
     
  5. ScubaSteve728

    ScubaSteve728 Senior Member
    Messages: 477

    clean all connections on both side of plugs and then add dielectric grease
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    do you have gnd?
     
  7. fordpusher

    fordpusher Member
    from mass
    Messages: 31

    Yes I have a good ground
     
  8. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    If you say you have pwr and gnd then it should work. I think you need to double ck something