1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 Fluid level?

Discussion in 'Fisher Engineering Discussion' started by searay220, Feb 8, 2010.

  1. searay220

    searay220 Member
    Messages: 99

    How can I check the fluid level on my MM2 HD and at what level should it be at??
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Haven't had a straight blade for three years, but pretty sure there is a fill plug at an angle on the side. Make sure the lift ram is fully compressed. Check your owner's manual.
     
  3. mkwl

    mkwl 2000 Club Member
    Messages: 2,361

    Have the plow on a level surface, compress the lift ram, open the fill plug- fill to almost overflowing (up to bottom of opening)... put the plug back in and you're all set ;)