1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 EZ V angle cylinder woes

Discussion in 'Fisher Engineering Discussion' started by Grotonems5, Mar 17, 2015.

  1. Grotonems5

    Grotonems5 Member
    from Vermont
    Messages: 47

    I picked up a used MM2 EZV with a bad angle ram. I've been researching and researching but I cannot figure out what I need. From what I can gather, what is on it currently is 1 1/2" x 12 cylinders. All I can find for replacement is 2" x 12 cylinders. ($307 new at the local dealer)

    Any guidance? The PO had put JB weld around the nut and a bead of weld on one side.

    IMG_3491.jpg

    IMG_3492.jpg
     
  2. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

  3. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238